Mocom millennium B, Service Manual, Page: 62 / 285

Rev.1
Page 1-
58
MAX level in the internal/ external drain tank
When the water level in the internal or external used water tank reaches the MAX level, the LCD display alternatively lights the MAX and MIN
icons.
MAX
MIN
e
In this condition the unit will generate an alarm indication as you attempt to launch a sterilization cycle.
In this case, empty the internal or external draining tank.
Emptying the internal tank
Referring to the figure, open the door and operate in the following way:
1. Arrange an empty tank on the floor near the sterilizer and put the free end of the supplied tube into the tank;
2. Connect the quick connector to the corresponding female connector under the chamber entrance (marked ), pushing until you hear a click;
3. Wait for the complete empty of the internal tank; then while pinching the tube with your fingers, press the metal lever located on the side of the connector
and detach the quick connector.
Emptying the external tank
Remove the top cap from the external tank and empty into a sink the water exceeding the signed level.
Do not empty the tank completely, but keep a quantity of water up to the marked level. Otherwise the water draining sound and the steam
escape from the vent-hole will increase considerably.
Refer to chapter “
CONNECTING AN EXTERNAL DRAINING TANK ” for more details