Mitsubishi FX2N-16CCL-M, User Manual

Page: 128 / 194

FX2N-16CCL-M CC-Link System Master Block Data Link Procedure 8
8-18
The test result is indicated by the LED indicators in the master module.
By changing over the setting of the mode setting switch, the contents of the parameter corresponding
to each mode number are indicated by the LED indicators.
Continued from the previous page
Total number of stations
Parameter item Used LED indicators and contents
0
Mode setting
switch
Number of connected modules 1
2 Number of retries
10's digit : MST, TEST1, TEST2
1's digit : SW, M/S, PRM, TIME
MST
TEST1
TEST2
❍
❍
❍
SW
M/S
PRM
TIME
❍
❍
❍
❍
··········40
··········20
··········10
··········8
··········4
··········2
··········1
MST
TEST1
TEST2
❍
●
❍
SW
M/S
PRM
TIME
❍
●
●
❍
In the case of 26
3 (Unusable)
4
5
Reserved station specification
*1
Invalid station specification
*1
6 Station type
*1*2
SW (OFF: No specification, ON: Specification given)
SW (OFF: No specification, ON: Specification given)
SW
M/S
7 Number of occupied stations
*1*2
SW
M/S
PRM
TIME
8 Station number
*1
10's digit : MST, TEST1, TEST2
1's digit : SW, M/S, PRM, TIME
MST
TEST1
TEST2
❍
❍
❍
SW
M/S
PRM
TIME
❍
❍
❍
❍
··········40
··········20
··········10
··········8
··········4
··········2
··········1
MST
TEST1
TEST2
❍
●
❍
SW
M/S
PRM
TIME
❍
●
●
❍
In the case of 26
9 to F (Unusable)
*1 Set the station number of the module using the station number setting switch.
*2 For a module occupying 2 or more stations, the same contents are indicated for
as many as the number of occupied stations.
End
: 1 station
: 2 stations
: 3 stations
: 4 stations
: Remote I/O station
: Remote device station