Mitsubishi FX2N-16CCL-M, User Manual

Page: 108 / 194

FX2N-16CCL-M CC-Link System Master Block Parameter Setting 7
7-12
2) Operation based on parameters registered in the EEPROM
a) Parameter registration procedure to the EEPROM
1.Write the parameter setting program shown below.
2.Turn ON the EEPROM registration command.
3.When parameter registration to the EEPROM is completed, the system can be
operated using only the program for "a) Operation based on parameters registered in
the EEPROM".
The parameter setting program is not required
Parameter setting program
K1 K4M20 HA K0 FROM
M0 PLS
M1 SET
MOV D0
MOV D1
MOV D2
K3 D0 H0001 K0 TO
MOV D3
K1 D3 H0006 K0 TO
MOV D4
K1 D4 H0010 K0 TO
MOV D5
K1 D5 H0014 K0 TO
M8000
Module
error
M20 M35
RUN monitor
Module
ready
M1
M1
Operation specification
against CPU down (stop)
Number of automatic return
modules (2 modules)
Number of retries (3 times)
Number of connected
modules (5 modules)
BFM#A
H
→
M35 to M20
Reserved station
specification
Invalid station
specification
M0
K5
K3
K2
K0
H0004
H0100