Mitsubishi FX2N-16CCL-M, User Manual

Page: 39 / 194

FX2N-16CCL-M CC-Link System Master Block Specification 4
4-5
Dedicated high-performance CC-Link cable (for the CC-Link system V 1.10)
(requiring terminal resistor of 130
Ω
)
When the entire system consists of only equipment and cables V 1.10, the following
advantages are offered.
1) The cable distance between two stations is defined to 20 cm or more in any condition.
2) Because the degree of freedom in the cable length is improved, the wiring work and the
system layout become easier.
3) Because excessive cable length does not have to be assured when modules are located
near each other, the space efficiency is improved.
4) Cables produced by diversified manufacturers can be used at the same time.
Example:
When remote I/O stations and remote device stations are connected with dedicated high-
performance CC-Link cables and the transmission speed is set to 10 Mbps, the maximum
transmission distance is "100 m".
4.5 Dedicated CC-Link Cable
Use dedicated CC-Link cables in the CC-Link system.
If any other cable is used, the performance of the CC-Link system cannot be guaranteed.
Table 4.4:
Transmission
speed
Cable length between stations
Maximum
transmission
distance
*1 *2
156kbps
20 cm or more
1200m
625kbps 900m
2.5Mbps 400m
5Mbps 160m
10Mbps 100m
Master station
Remote I/O
station
Remote device
station
Remote I/O
station
Remote I/O
station
Remote device
station
·······
10th module 4th module 3rd module 2nd module 1st module
1m 50cm 35cm 50cm
100 m maximum