Mitsubishi FX2N-16CCL-M, User Manual

Page: 103 / 194

FX2N-16CCL-M CC-Link System Master Block Parameter Setting 7
7-7
7.3.2 Parameter registration procedure to the EEPROM and operation based on parameters
registered in the EEPROM
1) Parameter registration procedure to the EEPROM
1.Write the parameter setting program shown below.
2.Turn ON the EEPROM registration command.
3.When registration of parameters to the EEPROM is completed, the system can be
operated using only the program for "2) Operation based on parameters registered in the
EEPROM."
Parameter setting program
K1 K4M20 HA K0 FROM
M0 PLS
M1 SET
MOV D0
MOV D1
MOV D2
K3 D0 H1 K0 TO
MOV D3
K1 D3 H6 K0 TO
MOV D4
K1 D4 H10 K0 TO
M0V D5
K1 D5 H14 K0 TO
MOV D13
K D13 H20 K0 TO
RST M1
M8000
Module error
M20 M35
RUN monitor
Module ready
M1
M1
M1
~
MOV D
Only when
required
Operation specification against
CPU down
Number of automatic return
modules
Number of retries
Number of connected modules
BFM#A
H
→
M35 to M20
Reserved station specification
Invalid station specification
Station information (set for
only connected modules)
M0