Mitsubishi FX2N-16CCL-M, User Manual

Page: 122 / 194

FX2N-16CCL-M CC-Link System Master Block Data Link Procedure 8
8-12
8.6 Switch Settings
This section describes the setting method of each switch in the modules.
8.6.1 Station number setting (master station, remote I/O stations and remote device stations)
This section describes the method to set the station number of the master station, remote I/O
stations and remote device stations.
1) Set the station numbers to be consecutive.
The station number can be set without regard to the connection order.
For a module occupying 2 or more stations, set the head station number.
Setting example: When setting the station numbers in the connection order
Point
Align the settings with the contents stored in the parameter information area "station
information (addresses 20
H
to 2E
H
)" in the buffer memory.
Table 8.3:
Station type Station number to be set
Master station 0 (fixed)
Remote I/O station
Remote device station
1 to 15
Master
station
➀
Remote I/O station
(occupies 1 station)
Station No. 1 Station No. 2
➂
Remote
device station
(occupies 4
stations)
Station No. 3 Station No. 0
➁
Remote I/O station
(occupies 1 station)
➃
Remote
device station
(occupies 2
stations)
Station No. 7
Station No. 1 Station No. 2 Station No. 3 Station No. 4 Station No. 5 Station No. 6 Station No. 7 Station No. 8 Station No. 9 Station No. 0
Master
station
(fixed)
➀
Remote I/O
station
➁
Remote I/O
station
➂
Remote device station
➃
Remote device station