Minebea Intec CAW2P, Operating Instructions Manual

Page: 159 / 224

— MIN.INIT 3.6 - Minimum load for application
— 1 DIGIT 3.6.1 - 1 digit*
— 2 DIGIT 3.6.2 - 2 digits
— 5 DIGIT 3.6.3 - 5 digits
— 10 DIGT 3.6.4 - 10 digits
— 20 DIGT 3.6.5 - 20 digits
— 50 DIGT 3.6.6 - 50 digits
— 100 DIG 3.6.7 - 100 digits
— 200 DIG 3.6.8 - 200 digits
— 500 DIG 3.6.9 - 500 digits
— 1000 DI 3.6.10 - 1000 digits
— PRT.SAV. 3.17 - Individual/Component printout when
saved
— OFF 3.17.1 - Automatic printing of
— EACH.TIM 3.17.2 - Print the entire standard print
coniguration every time when the
key is
pressed*
— ONCE 3.17.3 - Print the entire standard print
coniguration once with the
key
- Additive mode : Display the weight of all components on the platform (after it is
saved, the net weight of the last component added is displayed briely)
- Toggle to a second weighing platform while weighing in
- Activate Info mode via the key
- Automatic component printout when it is saved
Setting: [APPLIC.] - [APPLIC.3] - [NET TOT] - [PRT.SAV.] (3.17) (see chapter
6.1.3.1 ).
- Automatic taring of container weight
Setting: [APPLIC.] - [AUT.TARE] (3.7) (see chapter
6.1.4 ).
- Restore factory default settings
Setting: [APPLIC.] - [DEF.APP.] (9.1) (see chapter
6.1.9 ).
7.14.1 Available Parameter Settings
Description of the parameters:
- Minimum load for application, see chapter 7.14.1.1
- Component record, see chapter 7.14.1.2 ).
Menu tree of the parameters Net Total:
NET TOT
* Factory setting
1. Select menu [APPLIC.] - [APPLIC.3] - [NET TOT] with key and open with
key (see chapter 6.1.3.1 ).
2. To save the setting, press the key.
3. To exit setup: Press the key several times.
7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec EN-157