Cables and hoses between the weighing platform and other devices may not exert any
forces on the weighing platform. These cables may not touch the weighing pan.
When setting up systems in hazardous areas (Zone 2 or 22), any relevant speciications
should be observed, e.g.: EN60079
‑
14.
The design should ensure that moving parts do not cause electrostatic discharges (e.g.
roller conveyors).
4.2.12
Preload range (zero set range)
The weight of the superstructures that are attached to the weighing platform is
designated as a "preload". The preload is electronically compensated for in the weighing
platform so that the full weighing range remains available and thus zeroing and/or
calibration/adjustment (with external weights) is possible.
Greater preloads reduce the weighing capacity.
The preload must always be set before veriication.
4.3 Accessories
4.3.1
Printer
Product
Order No.
Veriiable data printer with date/time and statistics functions with LCD
display.
YDP21
5 x 40 m paper rolls for data printer
6903952
Replacement ink ribbon cartridge for printer
6906918
Veriiable strip and label printer with barcode printout, paper width
108 mm, with adapter cable (12-pin round male connector) and external
power supply.
ZD420d
Veriiable strip and label printer with barcode printout, paper width
108 mm and external power supply.
ZD420t
Ink ribbon for ZD420t
69Y03234
Labels for ZD420d:
101 x 127 mm (305 labels)
69Y03195
Printing paper for ZD420d
1 paper roll 101 mm x 75 m, thermal paper
69Y03196
Veriiable strip and label printer with thermal print head, paper width
60 mm, with adapter cable and external power supply.
YDP05
Adapter cable for CAW*P
YCC01-
01CISLM3
Adapter cable for CAW*S, CAS
YCC02-D09M6
Ink ribbon for ZD420t
3 paper rolls YDP05
60 mm x 75 m, thermal paper
69Y03090
Labels, small, 58 mm x 30 mm, 1000 labels
69Y03092
Combics 2 Series Complete Scales Models CAW2P, CAW2S
4 Device installation
EN-38
Minebea Intec
