Minebea Intec CAW2P, Operating Instructions Manual

Page: 152 / 224

Digital Input/Output Interface
K1 K2 K3
1 2
3
K3
4
K1
K2
Control lines when working with 3 classes
K1 K2 K3 K4 K5
1 2
3
K 1/2
K 4/5
4
K 2/3/4
Control lines when working with
5 classes
1 Min. load 3 Set
2 Max. load 4 Operative
K1…K5 Class 1…5
The [OUTPUT] (4.3.1) "Set" output normally changes its voltage level when the load is near
the target weight. Alternatively, you can assign the [OP.READY] (4.3.2) "Ready for use"
function to this port.
Setting: [APPLIC.] - [APPLIC.2] - [CLASS.] - [PARAM.2] - [CTRL.SET] (4.3) (see
chapter 6.1.2.2.2 ).
7.12.8 Example: Classiication
There should be three classes.
Coniguration: The "Classiication" application is selected, and printout has been set up
(see chapter 7.16 ).
1. Enter the class limits using the key.
Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating
EN-150 Minebea Intec