Note:
If automatic printout of results is enabled, you do not need to press the
key.
The results are printed automatically. Printout coniguration, see chapter
Setp + 1.250 kg
Min + 1.240 kg
Max + 1.280 kg
G# + 1.256 kg
T + 0.000 kg
N + 1.256 kg
Lim + 0.48 %
W.Diff+ 0.006 kg
Target
Minimum
Maximum
Gross weight
Tare weight
Net weight
Percentage of deviation from target*
Absolute deviation from target
* When displayed in relation to target value:
-
If the weight is lighter than the lower limit, the display shows: LL
-
If the weight is heavier than the upper limit, the display shows: HH
7.12 Classiication application
With this "Classiication" application, you can determine whether the weight of a given
sample lies within the limits of a deined weight class
Menu: [APPLIC.] - [APPLIC.2] - [CLASS.] (see chapter
Features
-
Classiication with 3 or 5 weight classes.
Setting: [APPLIC.] - [APPLIC.2] - [CLASS.] - [PARAM.2] - [QTY.] (4.8) (see
chapter
)
-
Enter the upper class limits using the keypad or by saving weight values from a load
on the platform
8. Remove the sample with the target weight from the weighing platform.
9. The samples can now be checked one after the other.
yellow LED: sample too heavy
green LED: sample in tolerance range
red LED: sample too light
The LEDs next to the display indicate the results:
10. Print the results with
key.
7 Operating
Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec
EN-145
