Minebea Intec CAW2P, Operating Instructions Manual

Page: 49 / 224

— PARAM1 1 – Parameter 1
— CAL.JUST 1.9 - Calibration, adjustment
— CAL.EXT. 1.9.1 - External calibration with default weight*
— CAL.E.AUT. 1.9.2 - External calibration, weight is detected
(see Chapter 6.3.1.1.1 menu item 1.18.1)
[HND.EXT.G]- [CAL.JUST]
— CAL.E.USR. 1.9.3 - External calibration with user weight
— CAL.INT. 1.9.4 - Internal calibration (IS scales only)
— LIN.INT.
1.9.5 - Internal linearization (IS scales only)
1)
— LIN.EXT. 1.9.6 - External linearization with standard
weights
1)
— LIN.E.USR
1.9.7 - External linearization with user weights
1)
— SET.VORL 1.9.8 - Set preload
— CLR.VORL 1.9.9 - Delete preload
— GESPRT. 1.9.10 - Key locked
— HND.EXT.G 1.18 - Manual entry of the external weight
— CAL.JUST 1.18.1 - Cal/adj weight
— LIN.GEW.1
1.18.2 - Linearization weight 1
1)
— LIN.GEW.2
1.18.3 - Linearization weight 2
1)
— LIN.GEW.3
1.18.4 - Linearization weight 3
1)
— LIN.GEW.4
1.18.5 - Linearization weight 4
1)
— JUS.OHN.G
1.19 - Calibration without weight
SM)
— NENNLST 1.19.1 - Maximum capacity
— AUFLOES
1.19.2 - Resolution
2)
— EMPFND.1 1.19.3 - Sensitivity 1
— EMPFND.2 1.19.4 - Sensitivity 2
— EMPFND.3 1.19.5 - Sensitivity 3
— EMPFND.4 1.19.6 - Sensitivity 4
— NUL.PNKT 1.19.7 - Zero point
— SPEICH. 1.19.8 - Save parameters
— GEOG.DAT
the most important adjustments and calibrations in the and on the connected weighing
platform, e.g. the ADC coniguration.
When service mode is activated, this is indicated by an "S" in the upper right-hand corner
of the display. Restarting the display unit deactivates the service mode.
In service mode, the following parameters are added to the [SETUP] menu, following the
user code:
- [S-DATUM] to enter the next service date (see Chapter 6.3.12 )
- [SER.NR] to enter the device serial number (see Chapter 6.3.13 )
- [MODELL] with the model designation (see Chapter 6.3.14 )
- [SQMIN] (see Chapter 6.3.15 )
- [ALIBI.SP] to delete the Alibi memory (see Chapter 6.3.16 )
The numeric menu for WP1 and WP2 has been expanded to include the following settings
for coniguring the weighing platforms:
Menu: [SETUP]- [WP-1]- [INTERN.]- [PARAM1] (see also Chapter
6.3.1.1.1 ).
5 Getting started Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec EN-47