Minebea Intec CAW2P, Operating Instructions Manual

Page: 60 / 224

— APPLIC. Setting and selection applications (see
chapter 6.1 )
— FN-KEY
Deines functions of the key (see
chapter 6.2 )
— SETUP Adjusts device settings to user requirements
(see chapter 6.3 )
— INFO Displays device-speciic information (see
chapter 6.4 )
— LANGUAG Language setting for display and printout (see
chapter 6.5 )
— ADC.CON ADC coniguration settings (see chapter 6.6 )
— APPLIC.1 Basic weighing function, Counting , Neutral
measurement nM, Animal weighing ,
Weighing in percent applications (see
chapter 6.1.1 )
— APPLIC.2
Checkweighing , Classiication
applications (see chapter 6.1.2 )
— APPLIC.3
Net total formulation , Totalizing
applications (see chapter 6.1.3 )
— AUT.TARE Automatic Taring (see chapter 6.1.4 )
— MIN.TARE Minimum load for automatic taring and
automatic printing (see chapter 6.1.5 )
— AUT.STRT For "On" automatic start of application with the
last saved initialization data (see chapter 6.1.6 )
— CLER.CF
Selective deleting with the key (see
chapter 6.1.7 )
— TARE.FNC Tare function (see chapter 6.1.8 )
— DEF.APP. Resets all applications to factory settings (see
chapter 6.1.9 )
— APPLIC.1 Basic weighing function, Counting , Neutral
measurement nM, Animal weighing ,
Weighing in percent applications
— WEIGH. Basic weighing function
— COUNT. Counting application (see chapter 6.1.1.1 )
— NEUTR.M
6 Menu structure
Overview of the complete menu structure; individual setting parameters are listed on the
following pages. The indicator only displays the menus that correspond to the available
hardware.
6.1 APPLIC.
Setting and selection applications
APPLIC.
6.1.1 APPLIC.1
APPLIC.
APPLIC.1
Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure
EN-58 Minebea Intec