Protection Class 1 Device
Schutzmaßnahmen
CAUTION
Property damage and/or personal injury are possible.
If you use an electrical outlet that does not have a protective grounding conductor,
ensure that an equivalent protective conductor is installed by a certiied electrician
(as speciied in the applicable regulations for installation in your country).
The protective efect must not be negated by using an extension cord without a
protective grounding conductor.
Before using for the irst time, any superstructure parts must be completely installed.
Avoid connecting the equipment to lines that have a heavy electrical load, e.g.
compressors, large machinery, etc.
4.2.8.2.7 Connecting a Barcode Scanner (Accessory; Order No. YBR05PS2)
For CAW2P models
:
For CAW2S models
:
4.2.9
Operating limits
You should not exceed the highest load for weighing platforms. The highest capacity for
the weighing platform is as follows depending on the load used (center, side, one-sided
corner load):
.
The device must be plugged into a properly installed wall outlet.
.
The device must be plugged into a properly installed wall outlet which has a
protective grounding conductor (PE).
.
Disconnect the indicator from AC power (unplug the AC adapter)
.
Connect the barcode scanner via PS/2.
.
Implemented via the YCC02-BR02 connecting cable or as option M8 (see
chapter
Combics 2 Series Complete Scales Models CAW2P, CAW2S
4 Device installation
EN-36
Minebea Intec
