Model CAW2S
Indicator side
PC side
Open cable end
D
‑
Sub connector
9
‑
pin. or 25
‑
pin.
Sgn GND
TxD
RxD
DTR
CTS
15
14
13
12
11
5 GND
2 TxD
3 RxD
8 DTR
4 CTS
7 GND
3 TxD
2 RxD
5 DTR
20 CTS
4.2.8.2.5 Closing the Combics indicator
4.2.8.2.6 Connecting the Device to AC Power
The indicator is powered through the pre-installed power cord. The power supply is
integrated into the indicator. The device can be operated with a supply voltage of 100 …
240 V.
CAUTION
Property damage and/or personal injury are possible.
The power connection must be made in accordance with the regulations applicable
in your country.
Make sure that the voltage rating printed on the manufacturer's ID label is identical to
that of your local line voltage. If the voltage speciied on the label or the plug design of
the AC adapter do not match the rating or standard you use, please contact your Minebea
Intec oice or dealer.
Put the front panel in place and fasten it with the ten cap nuts (1 Nm).
.
Check the voltage rating and plug design.
4 Device installation
Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec
EN-35
