— PROTOC.
7 - Printouts
— HEADLIN
7.4 - Header and ID header input
— QTY. 1
7.5 - Quantity interface 1
— INDIV.1
7.6 - Standard interface 1
— COMPON.1
7.7 - Component interface 1
— TOTAL 1
7.8 - Result interface 1
— QTY..2
7.9 - Quantity interface 2
— QTY.2
7.10 - Standard interface 2
— COMPON.2
7.11 - Component interface
— TOTAL 2
7.12 - Result interface 2
— GMP.PROT
7.13 - ISO/GMP
— DAT/TIM
7.14 - Date without time
— AUT.ONCE
7.15 - Automatic printout after stability
— FLEX.PRN
7.16 - Flex print
— DEC.SEP.
7.17 - Decimal separator
— DAT.REC.
7.18 - Alibi memory
— RESET
9 - Restore factory default settings
— SETTING
9.1 - Setting factory settings
Automatic printout of the application when the setup menu is activated:
-
Animal weighing (averaging)
-
Checkweighing
-
Classiication
-
To output the component protocol:
Totalize/generate net total by pressing
Setting: [ANWEND.]- [ANWEND3]- [SUMME]- [DRUCK.UEB] (3.17) "Component
printout"
-
To output totals protocol:
With the Totalization/Net total program selected, press the
key
-
After changing an application in the setup menu, only the application-dependent
protocol lists are deleted. The other protocol lists remain unchanged.
-
Print items can be deleted individually: Press and hold the
key
-
"Form feed" print items with protocol footer:
Feed to the start of the next label in printer mode:
ZD420: "Label" and YDP05, "Label, form feed manual" setting
-
Check ISO/GMP protocol: The setup setting under ISO/GMP protocol is also active
when the protocol is conigured.
7.16.1
Available Parameter Settings
Other printing features, see chapter
).
* Factory setting
-
The rows of the protocol list can be called up and activated individually.
Example: see chapter
Combics 2 Series Complete Scales Models CAW2P, CAW2S
7 Operating
EN-166
Minebea Intec
