Mindray VS-900, Operator'S Manual

Page: 29 / 192

2-9
This area normally shows patient information, such as patient medical record number,
patient name, patient category, room, bed number, clinician ID.
When a system related message is presented, the second line of this area will display
the system prompt message for 30 seconds. The patient information there will be
covered temporarily.
(2) Alarm Information Area
There are three sections in this area: The left side of this area shows the technical
alarm message or prompt message; the middle area shows the physiological alarm
message; and the right side of this area shows the alarm symbol.
indicates alarms are paused.
indicates alarms are reset.
indicates alarm sounds are turned off.
(3) Parameter and waveform area: displays parameters and waveforms.
(4) Manual input area: manually input physiological related value. This area does not
display by default. Refer to 4.2 Manually Input Patient Data for additional
information.
(5) Menu QuickKeys

Main: Accesses the [ Main ] screen to configure the monitor, or quickly returns to
the main screen.

Scoring: Accesses the screen to evaluate a patient’s condition. Refer to 12
Clinical Scoring.

Patient List: Accesses the [ Local Patient List ] and [ ADT Database ] screen to
admit a patient stored in the monitor or ADT database. Refer to 4.1.3 Admitting
a Patient from [Patient List] .

Review: Displays the spot check trends, continuous trends and graphic trends.
Refer to
4.4 Reviewing Patient Data .

Save: Accesses the [ Results ] screen to manually save patient data. Refer to 4.3
Manually Save Patient Data .
(6) Network and USB connection area
Indicate the connection of network or USB to this monitor.
indicates monitor is connected to a wire network successfully.
indicates the wireless function is working.
indicates monitor has failed to connect a wire network.
indicates the wireless function is not working.