Mindray VS-900, Operator'S Manual

Page: 39 / 192

3-7
3.5.1 Setting up a Monitor
To install a monitor or change the monitor’s location, you need to set it as follows:
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
Enter the required
password
→
Select [ Ok ] and then access [ User Settings ] menu.
2. Set up [ Monitor Name ], [ Department ] and [ Bed No. ].
You can set [ Changing Bed No. ] to:

[
Unprotected
]: enables you to change Bed No. from the [
Patient Demographics
]
menu.

[ Protected ]: prevents you from changing Bed No. from the [ Patient
Demographics
] menu.
3.5.2 Changing Language
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
Enter the required
password Select [ Ok ] to access [ User Settings ] menu.
2. Select [ Language ] and then select the desired language.
3. Restart the monitor.
3.5.3 Configuring the Timeout of Clinician ID
You can configure the retention time of a clinician ID each time it is entered.
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
Enter the required
password
→
Select [ Ok ]and then access [ User Settings ] menu.
2. Select [ Clinician ID Time out ] and then set the time.
3.5.4 Showing/Hiding Patient Name
You can show or hide the current patient name in the main screen. To do so, follow this
procedure:
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
Enter the required
password
→
Select [ Ok ] and then access [ User Settings ] menu.
2. Select [Patient Demographics].
3. Set [ Display Patient Name ] to [ Yes ] or [ No ].

[ Yes ]: the patient’s name display in the main screen.

[ No ]: the patient’s name does not display in the main screen.
3.5.5 Adjusting Alarm Volume
1. Select [ Main ]
→
[ General Setup>> ].