Mindray VS-900, Operator'S Manual

Page: 55 / 192

5-3
5.5 Transferring a Configuration
When installing several monitors with identical user configuration it is not necessary to
set each unit separately. A USB drive may be used to transfer the configuration from
monitor to monitor.
To export the current monitor’s configuration:
1. Insert a USB disk to the monitor’s external device connector.
2. Select [ Export Config >> ] in the [ Manage Configuration ] menu.
3. In the [ Export Config ] menu, select the configurations and the user maintenance
settings to be exported. Then select the [ Export ] button.
To import the configuration on the USB drive to the monitor:
1. Connect the USB Drive to the monitor’s external device connector.
2. Select [ Import Config >> ] in the [ Manage Configuration ] menu.
3. In the [ Import Config ] menu, select the configurations and the user maintenance
settings to be imported. Then select the [ Import ] button. A status message will
report completion of the transfer.
5.6 Loading a Configuration
You may make changes to some settings during operation. However, these changes or the
pre-selected configuration may not be appropriate for the newly admitted patient.
Therefore, the monitor allows you to load a desired configuration so as to ensure that all
the settings are appropriate for your patient.
To load a configuration:
1. Select [ Load Configuration >> ] from the main menu. The popup menu shows the
existing configurations on the monitor. Selecting [ Config on USB drive >> ] will
show the existing configurations on the USB drive.
2. Select a desired configuration.
3. Select [ Load ] to load this configuration.
The current configuration is shown at the top of the [
Load Configuration ] menu.