Mindray VS-900, Operator'S Manual

Page: 130 / 192

16-2
WARNING

Be sure to shut down the system and disconnect all power cables from the
outlets before cleaning the equipment.

Use only the substances approved by us and methods listed in this chapter to
clean or disinfect your equipment. Warranty does not cover damage caused by
unapproved substances or methods.

We make no claims regarding the efficacy of the listed chemicals or methods as
a means for controlling infection. For the method to control infection, consult
your hospital’s Infection Control Officer or Epidemiologist.
CAUTION

If you spill liquid on the equipment or accessories, contact us or your service
personnel.
16.1.1 Cleaning
Your equipment should be cleaned on a regular basis. If there is heavy pollution or lots of
dust and sand in your place, the equipment should be cleaned more frequently. Before
cleaning the equipment, consult your hospital’s regulations for cleaning the equipment.
Recommended cleaning agents are:

sodium hypochlorite bleach (diluted)

Hydrogen peroxide (3%)

Ethanol (70%)

Isopropanol (70%)
To clean your equipment, follow these rules:
1. Shut down the monitor and disconnect it from the power line.
2. Clean the display screen using a soft, clean cloth dampened with a glass cleaner.
3. Clean the exterior surface of the equipment using a soft cloth dampened with the
cleaner.
4. Wipe off all the cleaning solution with a dry cloth after cleaning if necessary.
5. Dry your equipment in a ventilated, cool place.