Mindray VS-900, Operator'S Manual

Page: 85 / 192

9-7
Patient Category Range (mmHg) Default (mmHg)
Adult 80 - 280 160
Pediatric 80 - 210 140
Neonate 60 - 140 90
NOTE

For known hypertensive patients, you need to set initial cuff pressure to a
higher value to reduce the measurement time.
9.7.3 Setting NIBP End Tone
The monitor can issue a reminder tone at the completion of NIBP measurement. The NIBP
End Tone is off by default. You can switch it on by accessing the [
NIBP Setup ] menu.
9.7.4 Switching On/Off Measurement on Clock
In auto measuring mode, if the clock is enabled, the NIBP automatic measurement
interval will be synchronized with the real time clock.
For example, if [ Clock ] is set to [ On ], and [ Interval ] is set to [ 20min ], and then you start an
NIBP auto measurement at 14: 03, the next measurement will be taken at 14: 20, and the
following measurement time will be 14:40, 15:00 and so on.
9.7.5 Configuring a Custom Program
In [ NIBP Setup ] menu, you can select [ Custom Program>> ] and configure the duration
of automatic measurement cycle, and the time interval between two NIBP measurement.
You can define two programs, respectively program 1 and program 2. Each program can
at most include five cycles: A, B, C, D, and E. In each cycle, the [
Duration ] and [ Interval ]
can be set individually.
You shall start the programmed NIBP measurement manually, and then the monitor will
automatically perform the measurement based on the cycle and interval you have
defined.