Mindray VS-900, Operator'S Manual

Page: 16 / 192

1-2

Do not open the equipment housings. All servicing and future upgrades must
be carried out by the personnel trained and authorized by our company only.

Do not come into contact with patients during defibrillation. Otherwise serious
injury or death could result.

Do not touch the equipment’s metal parts or connectors when in contact with
the patient; otherwise patient injury may result.

Do not rely exclusively on the audible alarm system for patient monitoring.
Adjustment of alarm volume to a low level or off may result in a hazard to the
patient. Remember that alarm settings should be customized according to
different patient situations and always keeping the patient under close
surveillance is the most reliable way for safe patient monitoring.

The physiological data and alarm messages displayed on the equipment are for
reference only and cannot be directly used for diagnostic interpretation and
replace the competent judgment of a clinician.

To avoid inadvertent disconnection, route all cables in a way to prevent a
stumbling hazard. Wrap and secure excess cabling to reduce risk of
entanglement or strangulation by patients or personnel.

When disposing of the packaging material, be sure to observe the applicable
waste control regulations and keep it out of children’s reach.

When no battery is installed, make sure that the power supply is continuous. A
power interruption will result in patient data loss.

Put the equipment in a location where you can easily see the screen, access the
operating controls, and disconnect the equipment from AC power.

The equipment uses a mains plug as isolation means to the mains power supply.
Please do not position the equipment in a place difficult to operate the mains
plug.

The equipment is not intended to be used within the magnetic resonance (MR)
environment.