Mindray Rosebud Accutorr V, User Manual

Page: 41 / 126

Accutorr V Service Manual 0070-10-0702 2 - 13
Specifications Display Area, Indicator, and Controller
2.6.5 Patient Cable Connectors
The patient cable connectors include the NIBP connector, SpO
2
connector, and the optional
thermometer connector.
CABLE
CONNECTOR DESCRIPTION
NIBP Cuff
The NIBP cuff connector label is .
SpO
2
The SpO
2
connector label is SpO
2
.
• Connects the DPM, Masimo, or Nellcor cable. The Label is SpO
2
with the
manufacturer name.
• Apply standard round DPM 6 pin connector (same as used on Trio) to the
monitor configured with the DPM SpO
2
board.
• Apply the Masimo connector to the monitor configured with the MS-2013
SpO
2
board.
• The monitor configured with the Masimo SpO
2
board must be labeled with
the Masimo SET registered trademark.
• Apply the Nellcor connector to the monitor configured with the Nell-3 SpO
2
board.
• The monitor configured with the Nellcor SpO
2
board must be labeled with the
Nellcor mark.
Temperature
probe The Temperature probe connector label is T1 .
• Uses optional Mindray Smartemp predictive temperature module.
• The connector of temperature probe (oral/axillary or rectal) is labeled “T1”.
• The oral/axillary probe is blue, and the rectal probe is red.