Disassembly
Repair and Disassembly
4 - 12
4.3.5
Removing the Main (CPU) Board
1.
Unplug the Main board power cable from the power supply as shown in FIGURE 4-18.
2.
Cut the tie wrap to the speaker as shown in FIGURE 4-18.
FIGURE 4-18
Unplug the Main board cable connector and cut one (1) tie wrap.
3.
Unplug the speaker cable (J10) from the Main board (see FIGURE 4-19).
4.
Unplug the recorder cable (J8) from the Main board (see FIGURE 4-19).
5.
Take out the main board by removing the four (4) M3×6 cross-head screws (as shown in
FIGURE 4-19).
FIGURE 4-19
Unplug (2) two cable connectors and remove four (4) M3x6 cross-head
screws.
Cable Tie
Cable Connector
Speaker Cable
Recorder Cable
M3x6 cross-head screw
M3x6 cross-head screw
M3x6 cross-head screw
M3x6 cross-head screw
Summary of Contents for Rosebud Accutorr V
Page 1: ...USER MANUAL Vital Signs Monitor...
Page 125: ...0070 00 0702 Rev 7 0 October 2015...
