Section 3
Getting Started
32
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
3.3 Handling the Lens Protection Cap
Your MkroScan 7600PRO was shpped wth a lens protecton cap whch was desgned
specifically for the MikroScan 7600PRO. The
lens protecton cap not only offers protec-
ton to the camera
lens, but it can also be used for performing a reference calibration of
the camera (See Secton 6.5.2 for more nformaton regardng on calbratng the nstru-
ment).
3.3.1 Removing the Lens Cap
1) Squeeze the clips on both side of the lens cap.
2) Pull the lens protection cap off of the camera lens.
3.3.2 Attaching the Lens Cap
1) Position the lens protection cap over the camera lens with the
clips aligned horizontally to the camera.
2) Squeeze the clips on both sides of the lens cap and place over the
camera lens.
3) Release the clips and verify that the lens protection cap is secure.
When camera opera-
tion has been completed,
always attach the lens
protection cap to protect
the lens from damage.
When camera opera-
tion has been completed,
always attach the lens
protection cap to protect
the lens from damage.
Summary of Contents for 7600PRO
Page 2: ......
