MikroScan 7600PRO, Operator'S Manual

Page: 181 / 309

Section 6
Data Analysis
171
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
6.3 Working with the Gain Control Function
The MkroScan 7600PRO ncludes a gan control feature whch s used for performng
automatc temperature or automatc senstvty tracng.
The two
GAIn COntROL
modes are as follows:
Mode Function
LeVeL tRACe
The cross cursor traces a point temperature signal, and always
controls for the temperature sgnal level to become the center
level of the color bar. When the cross cursor is not used, the
temperature signal of the center (X=160, Y=120) of the thermal
mage s traced.
AutO GAIn
It traces the temperature signal of the entire thermal image, and
always controls the dsplay senstvty and temperature level to
be at ther optmal values. By combnng use of ths mode and
the Level/Sens lnkng mode of the range mode, the temperature
sgnal can be traced beyond the range.
6.3.1 Selecting a Gain Control Option
1) Verify the camera is operating in
[RUN]
mode.
2) Go to
[MENU]
→
[MEASURE]
→
[AGC/LVT]
.
Classic View Menu
[AGC/LVt HIGHLIGHted]
[AGC/LVt HIGHLIGHted]
Standard View Menu
3) Press the
jOyStICK [e]
button to select the
AGC/LVT
option.
[AGC/LVt OPtIOn SeLeCted]
A bar wll appear at the bottom of the screen showng the
current AGC/LVT option:
NOTE
The Gain Control Feature
can be activated and de-
activated by pressing the
Menu button during the
temperature tracking.
A white gain control
label indicates that the
Gain Control option has
been activated, while a
green label indicates that
the Gain Control feature
has been deactivated.
NOTE
The Gain Control Feature
can be activated and de-
activated by pressing the
Menu button during the
temperature tracking.
A white gain control
label indicates that the
Gain Control option has
been activated, while a
green label indicates that
the Gain Control feature
has been deactivated.
NOTE
The temperature at
the cursor position is
displayed at the bottom
of the temperature scale,
immediately above the
MIKRON logo, and is
updated continuously
as the cursor is moved.
The cursor coordinates
are also displayed and
updated continuously as
the cursor is moved.
NOTE
The temperature at
the cursor position is
displayed at the bottom
of the temperature scale,
immediately above the
MIKRON logo, and is
updated continuously
as the cursor is moved.
The cursor coordinates
are also displayed and
updated continuously as
the cursor is moved.