MikroScan 7600PRO Operator'S Manual Download Page 67

Page: 67 / 309

Section 3

Getting Started

MikroScan 7600PRO

Operator’s Manual

Catalog 11180-94

V15.4F 050406

3) Toggle the

jOyStICK

up or down, if needed, to highlight

VOICE

MEMO

from the list of menu choices.

[VOICe MeMO HIGHLIGHted]

4) Toggle the

jOyStICK

to the right to highlight the voice memo

options.

[VOICe MeMO OPtIOn HIGHLIGHted]

5) Toggle the

jOyStICK

up or down as needed to select the desired

voice memo option.

[VOICe MeMO OPtIOn HIGHLIGHted]

The voce

memo options are:

• OFF (deFAuLt)
• On

6) Press the

jOyStICK [e]

button to lock the setting and to return to

the main display.

Summary of Contents for 7600PRO






















































































































































































































































































































Search results

Summary of Contents for 7600PRO

Reviews:

Related manuals for 7600PRO

Brands by name

Popular brands

MikroScan 7600PRO, Operator'S Manual

Search results

Summary of Contents for 7600PRO

Reviews:

Related manuals for 7600PRO

Brands by name

Popular brands