Section 1
General Information
2
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
1.4 Precautions
The followng precautons should be followed when handlng and operatng your
MkroScan 7600PRO thermal magng camera.
1.4.1 Power
Follow the connecton procedures descrbed n Secton 3.2 of ths manual.
1) Do not use an AC Adapter or batteres other than those provded or
specified by Mikron Infrared, Inc.
2) Do not use a source for lne power that s not n accordance wth
specifications.
3) Do not allow line voltage to exceed the specified noise or fluctuations
lmts.
1.4.2 Battery Pack
Follow the connecton procedures descrbed n Secton 3.2 of ths manual.
1) Do not dsassemble the battery pack or batteres.
If you disassemble the battery pack, the internal circuit will
break and the safety systems for chargng and dschargng wll
not operate properly which may cause overheating, fire, or
explosion. Also, if the battery pack is disassembled, it may
generate rrtatng gas or cause the negatve electrode to over-
heat and catch fire.
2) Do not short-crcut the battery pack or battery.
3) Do not expose the battery pack or battery to flame or water.
If the battery pack or battery is exposed to flame it may catch
fire or explode. If it is exposed to water, the internal circuit
wll break and the safety systems for chargng and dschargng
will not operate properly which may cause overheating, fire, or
exploson. Also exposure to water may cause the shelded por-
ton of the battery to corrode and leak.
4) Do not solder the termnal of the battery pack.
The heat may melt the case or break the nternal crcut and the
safety systems for chargng and dschargng wll not operate
properly which may cause overheating, fire, or explosion. Also
if the battery is heated at 100°C or more, the plastic material of
the gasket and separator may break and cause leakage, overheat
-
ing, fire, or explosion.
5) Do not operate the camera n an enclosed case.
Flammable gas generated by the battery may catch fire from
sparks generated from a motor or switch, etc.
6) Do not nstall the battery termnals (+) and (-) n reverse.
Summary of Contents for 7600PRO
Page 2: ......
