Section 9
Appendix
288
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
Symptom
Probable cause
Corrective Action
1 Instrument does not
power up.
Power s not turned on. Turn on the power swtch located
behnd the hatch cover on the back
of the camera (See Secton 3.5 for
more nformaton on Obtanng the
Frst Image).
AC Adapter s not con-
nected.
Connect the AC adapter. (See
Secton 3.2.3 for more nformaton
on Connectng the AC Adapter).
Battery s not nserted. Install the battery. (See Secton 3.2.2
for more nformaton on Attachng
the Battery Pack).
The battery s nserted
but not charged.
Charge the battery or use the AC
Adapter. (See Secton 3.1 for more
nformaton on Chargng the
Batteres or Secton 3.2.2 for more
nformaton on Connectng the AC
Adapter).
2 No mage n
viewfinder.
The dsplay seetng for
the LCD s set to LCD
Off
Set the dsplay settng for LCD
to LCD On (See Secton 3.7.2 for
more nformaton on Swtchng the
Camera from Viewefinder mode to
LCD Mode)
The lens cap s on.
Remove the lens cap. (See Secton
3.3 for more nformaton on Han-
dlng the Lens Protecton Cap).
The dsplay cable s
not connected.
Connect the dsplay cable (See
Secton 7.1 for more nformaton on
workng wth LCD Dsplays)
The RS232C settng
s not set to the ntal
value.
Set the RS232C settng to ts ntal
value (See Secton 7.1.3 and 7.1.4
for more nformton on wotkng
wth the RS232C settngs)
3 No mage n
viewfinder or on LCD
Dsplay
The RS232C settng
s not set to the ntal
value.
Set the RS232C settng to ts ntal
value (See Secton 7.1.3 and 7.1.4
for more nformton on wotkng
wth the RS232C settngs)
9.3 Troubleshooting Symptoms
Summary of Contents for 7600PRO
Page 2: ......
