Section 4
Basic Operation
94
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
4.2 Using the Power Standby Mode
The nstrument can be placed n Power Standby mode to conserve battery power and to
elmnate detector stablzaton tme when makng ntermttent measurements.
4.2.1 Working with the Power Standby ON Function
1) If using the Standard Type Menu, go to
[MENU]
→
[SETUP]
→
[STANDBY NOw]
.
[AutO StAndby HIGHLIGHted]
Standard View Menu
OR
If using the Classic Type Menu, go to
[MENU]
→
[STANDBY]
→
[ON]
.
[AutO StAndby HIGHLIGHted]
Classic View Menu
2) Press the
jOyStICK [e]
button to place the camera in Standby
Mode
.
The screen will darken and the Power On LED will flash
approxmately every 2 seconds. If the battery power s depleted
while in Standby mode, the Power LED will flash rapidly.
3) Press any key to cancel the standby mode and to return to normal
operation.
The nstrument wll go through the system check and normal
operaton wll resume after approxmately 20 seconds.
NOTE
All camera settings are
saved when the instru-
ment is in standby
mode.
NOTE
All camera settings are
saved when the instru-
ment is in standby
mode.
NOTE:
When activated, the screen
will darken and the camera
will enter standby mode.
Press any key to cancel
the standby mode and
to return to the normal
operation.
The instrument will then
go through the system
check and normal opera-
tion will resume after ap-
proximately 20 seconds.
NOTE:
When activated, the screen
will darken and the camera
will enter standby mode.
Press any key to cancel
the standby mode and
to return to the normal
operation.
The instrument will then
go through the system
check and normal opera-
tion will resume after ap-
proximately 20 seconds.
• The Standby feature
does not shut the camera
down. It only places the
camera in standby mode.
• Do not leave the camera
in Standby mode for an
extended period of time
as it will eventually de-
plete the battery charge.
• Be sure to turn the power
button off when the
measurements have been
completed.
• The Standby feature
does not shut the camera
down. It only places the
camera in standby mode.
• Do not leave the camera
in Standby mode for an
extended period of time
as it will eventually de-
plete the battery charge.
• Be sure to turn the power
button off when the
measurements have been
completed.
Summary of Contents for 7600PRO
Page 2: ......
