Section 2
Introduction
18
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
[OVeR]
As the temperature rses above the thresh-
old value, the event occurs. (This deter
-
mnes an event condton based on the
maxmum or mnmum temperature on a
thermal image, unless the threshold value
is specified otherwise. When a
BOX setup
is set as from A to E, it judges using the
maxmum or mnmum temperature of the
box wthn the lmts).
[deLAy]
Specifies the time from the occurrence
of an event condton to the freezng of
measurements, or the number of frames
automatcally saved to the memory card or
the nternal memory.
(0 tO ~60
SeCOndS
The tme from the occurrence of an event
condition to enter the freeze mode. (Note:
f
SAVE is set to OFF, the measurements
wll not be saved to the memory card or
the nternal memory.
(0 tO ~100
FRAMeS
Specifies the number of frames to auto
-
matcally record to the memory card
before the nstrument enters freeze mode
(Note: the total number of frames saved
wll be dependent upon the amount of
avalable space on the memory card)
(0 tO ~1664
FRAMeS
Specifies the number of frames to auto
-
matcally record to nstruments nternal
memory (RTM) before the nstrument
enters freeze mode.
[bOx]
Allows box range areas on a thermal
image to be defined to determine event
condtons.
[bOx]
Allows you to specfy a box range area on
the thermal mage to determne the event
condtons.
[WHOLe]
When WHOLE is specified, event condi
-
tons are determned on the entre thermal
mage.
[SAVe VISIbLe]
Allows you to automatcally lnk the vs-
ble lght data wth the thermal data when
savng an event to the memory card.
[OFF]
The nstrument wll only record the ther-
mal mage and mage data when an event
condton s trggered.
[IR LInK]
The nstrument wll record to the memory
card, the visible light image along with
the thermal mage and mage data as a
single .sit file when an event condition is
trggered.
Summary of Contents for 7600PRO
Page 2: ......
