MikroScan 7600PRO, Operator'S Manual

Page: 114 / 309

Section 4
Basic Operation
104
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
4.6 Adjusting the Focus
Precse focusng s mportant n order to provde the best vsual resoluton of the area
beng measured and to exclude extraneous surfaces or objects. The mnmum focus
range is 50 cm, while the maximum focus range is infinity.
4.6.1 Using the Focus Indicator Bar with the Standard Type Menu
1) Verify the display is in
[Run]
mode and that no other parameter is
highlighted.
2) Press and hold the
jOyStICK [e]
button to gain access to the
MikroScan 7600PRO quick menu functions.
3) Press the
jOyStICK [e]
button again until the focus indicator bar
appears becomes highlighted on the display.
[FOCuS IndICAtOR bAR]
[neAR] [FAR]
4) Toggle the
jOyStICK
upward to increase the focal distance.
[FOCuSInG IndICAtOR bAR]
Togglng the joystck upward wll move the blue focus ndcator
bar toward the far focus range of infinity.
OR
TIP
It may be helpful to
switch to a monochrome
display before focus-
ing. See Section 4.6.2
for more information
on Switching between a
Color an Monochrome
Display.
TIP
It may be helpful to
switch to a monochrome
display before focus-
ing. See Section 4.6.2
for more information
on Switching between a
Color an Monochrome
Display.