Section 5
Images and Image Files
131
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
5.1.2 Saving Image Data as .BMP Files
Lve and frozen mages can be saved to the memory card as btmap
files (
.bMP
). A file name is automatically assigned to each image
showing the four-character file prefix, the image number, and the
.bMP
file type extension.
To save an image as a bitmap file in either
[Run]
or
[FRz]
mode
:
1) Verify that a Mikron approved Compact Flash Memory Card has
been inserted into the camera (See Section 3.4 of this manual for
information on Inserting and Removing the Memory Card).
2) Follow steps 1-6 in Section 3.9.2.2 of this manual for information on
Selecting an Image Save Format.
3)
In step 5, select
[.bMP]
.
[.bMP OPtIOn SeLeCted]
4) Aim the camera at a specific target of interest.
5) Make any desired adjustments to the temperature range setting or
temperature level and sensitivity. (See Sections 4.4 through 4.10 of
this manual for more information on these settings).
6) Focus the camera. (See Section 4.6 for more information for
Adjusting the Focus of the camera).
7) Press the
SAVe
button.
[SAVe bItMAP MeSSAGe]
NOTES
1. When the measuring dis-
tance is more than 1 meter,
the visible camera has the
ability to display the full
screen area of the infrared
image.
2. When the measuring dis-
tance is less than 1 meter,
the visible camera can not
display a part of the infrared
image because of the differ-
ence in the optical axis.
3.
The viewing field is ob
-
structed by the installation
of the optional telephoto lens
or wide angle lens, therefore
the visible image can not be
displayed the same as the
infrared image.
4. Because the focus distance is
fixed, it can not focus a mea
-
suring object within 50cm.
Therefore, when the optional
close-focus lens is installed,
the visible image will not be
displayed correctly.
5. The infrared image and
visible image can not be
displayed simultaneously.
There is approximately a
one-second time difference
between the saving of a ther-
mal image and the saving of
a visible image.
6. The visible image can not
be displayed if the ambient
temperature becomes more
than 45°C during continuous
operation.
NOTES
1. When the measuring dis-
tance is more than 1 meter,
the visible camera has the
ability to display the full
screen area of the infrared
image.
2. When the measuring dis-
tance is less than 1 meter,
the visible camera can not
display a part of the infrared
image because of the differ-
ence in the optical axis.
3.
The viewing field is ob
-
structed by the installation
of the optional telephoto lens
or wide angle lens, therefore
the visible image can not be
displayed the same as the
infrared image.
4. Because the focus distance is
fixed, it can not focus a mea
-
suring object within 50cm.
Therefore, when the optional
close-focus lens is installed,
the visible image will not be
displayed correctly.
5. The infrared image and
visible image can not be
displayed simultaneously.
There is approximately a
one-second time difference
between the saving of a ther-
mal image and the saving of
a visible image.
6. The visible image can not
be displayed if the ambient
temperature becomes more
than 45°C during continuous
operation.
Summary of Contents for 7600PRO
Page 2: ......
