Section 2
Introduction
26
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
[MAnuAL]
NUC only works when changing to the
RUN mode. (default)
[AutO]
In AUTO, interval time is displayed. Inter-
val time is set from 1 minute to 24 hours.
[Set L/S]
Allows you to make adjustments based
on the level & sensitivity OR the level &
span.
[LeVeL/
SenSItIVIty]
Sets the intervals of the temperature color
bar scale. (default)
[LeVeL/SPAn
Sets the upper limit temperature value of
the color bar. Note: When the mode is set
to Level & Span, changes cannot be made
to the sensitivity settings..
[FILteRInG]
Allows an additional level of image
smoothing to a thermal image while the
instrument is in Freeze mode.
[On]
Displays the corrected image by spatial
filter on FREEZE (default)
[OFF]
The spatial filter correction is not per-
formed.
[ALL CLeAR]
Allows you to focus solely on the image
by hiding all display elements other than
the logo.
[On]
All display elements are visible such as
color bar, temperature scale, date, time,
etc. (default).
[OFF]
All display elements are hidden other than
the logo.
[StAtuS bAR]
Allows you to focus solely on a greater
portion of the image by hiding all status
bar elements on the display.
[On]
All status bar elements are visible such as
battery level, emissivity value, date, time,
etc. (default)
[OFF]
All status bar elements are hidden.
[COLOR bAR]
Allows you to choose whether or not to
display the color bar.
[On]
This option enables the display of the
color bar (default).
[OFF]
This option disables the display of the
color bar.
Summary of Contents for 7600PRO
Page 2: ......
