Section 6
Data Analysis
185
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
3) Toggle the
jOyStICK
down as needed to scroll through the high-
lighted temperature point labels to select the temperature point
[OFF]
option.
P. teMP [OFF] HIGHLIGHted
4) Press the
jOyStICK [e]
button to return to the main display.
Pressng
jOyStICK [e]
button wll clear all temperature ponts
from the dsplay.
6.5 Working with Emissivity Settings
Emssvty s the rato of the nfrared energy radated from the surface of a target to
the nfrared energy radated from a blackbody at the same temperature. The emssvty
vares wth the surface condton of the object and also wth temperature varaton and
wavelength. If this value is not accurate, then the true temperature cannot be measured.
In other words, a variation or change in emissivity will cause a change in the image
results from the MkroScan 7600PRO.
The MkroScan 7600PRO allows you to manually set these emssvty values wthn
the range of 0.10 to 1.00 n ncrements of 0.01. It also provdes an opton to choose the
approprate value from an on-board emssvty table.
6.5.1 Setting the Display Emissivity Using a Numerical Value
(Run Mode)
6.5.1.1 Using the Standard Type Menu
1) Verify the camera is operating in
[Run]
mode. (See Section 4.1 of
this manual for more information on Toggling between the Run and
Freeze Modes)
2) Press and hold the
jOyStICK [e]
button to gain access to the
MikroScan 7600PRO quick menu functions.
Summary of Contents for 7600PRO
Page 2: ......
