Section 3
Getting Started
34
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
3.5 Viewing Your First Image
1) Connect the power supply as described in Section 3.2 of this
manual.
2) Open the interface hatch cover on the back of the camera.
3) Insert the memory card or attach the appropriate cable to the
com serial port connector for video and data capture.
4) Move the power switch to the on position.
5) Remove the lens cover.
O = off position
I = on position
Once the power switch has been turned on, the camera will enter an
initialization mode. During initialization, a display will appear show
-
ng the software
version, the color palette bar, and the progress of the
system check n the form of a blue dotted lne.
Initialization in Progress
Camera Software Version
Palette bar
System Check
Once the initialization process has been completed, the camera
enters the run mode and the dsplay changes to show addtonal
nformaton on the varous camera settngs as well as the scene
towards whch the camera s ponted.
NOTE:
When the camera is
powered on, the display
is automatically placed
in run mode.
Summary of Contents for 7600PRO
Page 2: ......
