Section 4
Basic Operation
110
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
4.10 Using the Auto Processing Functions
The MkroScan 7600PRO ncludes an auto processng feature whch automatcally
focuses the nstrument and optmzes the temperature and senstvty ranges for the
target beng montored.
The three avalable
AutO
settngs are as follows
Feature
Function
FULL AUTO
Automatcally sets the optmum values for the
focus position, sensitivity or span, and tempera
-
ture level
AUTO FOCUS
Automatcally sets the optmum values for the
focus poston
LEVEL & SENS
(LEVEL & SPAN)
Automatcally sets the optmum values for the
temperature level and senstvty OR the tempera-
ture level and span.
4.10.1 Performing the Full Auto Function
1) Follow steps 1-6 for Setting the Auto Mode Function (See Section
3.9.1.3 of this manual).
2) Verify the
AutO MOde
option in the
[InItIAL SetuP]
menu is set to
[FuLL].
[AutO MOde FuLL
OPtIOn HIGHLIGHted]
3) Verify the camera is operating in
[Run]
mode (See Section 4.1 of
this manual for more information on Toggling between the Run and
Freeze Modes).
4) Press the
AutO
button
The screen wll freeze momentarly whle the nstrument s
auto processing. Once auto processing has been completed, the
dsplay wll once agan appear n
[Run]
mode.
NOTE
When there is little
difference between the
measuring object and
its surroundings, AUTO
Processing may not
function completely.
Refer to Sections 4.6
through 4.9 for more
information on adjusting
the focus, temperature
level and sensitivity.
NOTE
When there is little
difference between the
measuring object and
its surroundings, AUTO
Processing may not
function completely.
Refer to Sections 4.6
through 4.9 for more
information on adjusting
the focus, temperature
level and sensitivity.
Summary of Contents for 7600PRO
Page 2: ......
