3.
www.haihao.com.tw
HaiHao
USB Slot
1. Accessories:
1.Bag
4.USB Cable
3.Sling
5.Adapter for AC
6. Velcro
7. Magical clip
2. Plastic clip
(A) Front Lens
(B) Top Lens
2. Len directions : two types
*CAUTIONS*
A.
SD card repair
program : www.haihao.com.tw/upc/sdcardformat2.html
B.
「Lens Fogging」
is a common situation cause by difference of temperature. If it is happened and you should put the product to the dehumidifier or
air condition. It will disappear . To aviod the fog please put the product to the Ventilating and drying area when the rainy day.
C.
Do not
lack of the battery otherwise the time will
be reset
.
*POWER CHECK*
A. When the battery is lowly
(below 1.5 hr)
,lower power lights
(RED)
will twinkling per/min. If the power goes out, UPC-700W will close.
B. It will
display on the screen
when connecting Wi-Fi on the Phone.
UPC-700 Wi-Fi
(Body Cam)
User Manual Rev2.0
Standard Mode(without Wi-Fi)
(2) CONNECTING WITH THE USB
(1) RECORDING AND TURN OFF
A. Film mode : Press the "Top button" once, blue lights → about 4 to 5 secs it will be start
(blue-light twinkling)
.
B. Turn off : Video status
(blue-light twinkling)
or standby status
(blue-light)
. Pressing the "Top button"about 2 secs and the blue-light will twinkle quickly 2 times
→release the button and it will shut down (
blue-light goes out
).
C. Standby mode : When blue-light shining, means the Standby mode.
Body Cam will turn off
automatically when there is no action after 60 secs.
D. Camera mode : When it is Standby mode , press the "
Bottom button
" and it will take a photo(
blue-light
flashes once), then back to the Standby mode.
Pressing the "Top button " back to
Film mode
.
E. Screen Shot(Camera) : Under the Film mode press the "
Bottom button
" ,after
screen shot it will back to filming
.
F. IR/LED light On : Press the "
Bottom button
" for 2 secs when Body Cam is
recording
(before connecting Wi-Fi) or Standy mode. → The IR/LED light will turn on ;
then Press the "
Bottom button
"
for 2secs to turn off.
A. When connect to room electric (110V / 220V), car charger (12V)and power bank (5V) this status is
charge while recording
(red-light and blue-light twinkling)
.
If you want to shut down power,remove the cable away.
B. When connect to the computer or smartphone, it is
for reading the information standby mode
(blue light
shining
)If you want to remove from the computer or
smartphone please follow the procedure of unload memory required.
C.
Charge mode
: When Body Cam connect to the USB cable,which is connect to the room electric or computer. Using the "turn off" to stop video recording or data
reading (blue light off,
Charging red light on
). The Charging red light
will turn off
automatically when Body Cam is fully charged.
(3) DATA READING
A.Computer reads the data: Using USB cable to connect computer (
red and blue light, or just blue light
) → The screen will appear removable disk information,
→ Open the folder to view files, → Unmount hardware safely after reading.
*Note : (1). When read data from smartphone, hearing sound only but no video, need to press the " hardware decoding" and press the"software decoding" again.
(2). Please using SD card formatter program (
Reference the *CATIONS A
), and we suggest that format it regularly.
Signal light(
Blue light
)
Lower power light
(RED)
IR/LED light
IR/LED light
Wi-Fi Button
Top button
Bottom button
Wi-Fi
blue
light
Charging
red
light
