Mercedes-Benz C 240 Operator'S Manual Download Page 396

Page: 396 / 482

394

Practical hints

Replacing bulbs

Front turn signal lamp bulb

왘

Turn bulb socket

with the bulb

counterclockwise and remove it.

왘

Press gently onto the bulb and turn it
counterclockwise out of bulb
socket

왘

Press new bulb gently into bulb
socket

and turn clockwise until it

engages.

왘

Place bulb socket

back into the

lamp and turn it clockwise.

Parking and standing lamp bulb

왘

Press the clamp on housing cover

and remove it.

왘

Pull out bulb socket

with the bulb.

왘

Pull the bulb out of bulb socket

왘

Press the new bulb into bulb socket

왘

Press bulb socket

back into the

lamp.

왘

Align housing cover

and press until

it engages.

Side marker lamp

왘

Carefully slide the lamp towards the
rear in direction of arrows.

왘

Remove the front end first.

왘

Turn the bulb socket with the bulb
counterclockwise and remove it.

왘

Pull the bulb out of the bulb socket.

왘

Insert the new bulb into the bulb
socket.

왘

Place the bulb socket back into the
lamp and turn it clockwise.

왘

To reinstall the lamp, set the rear end in
the bumper and let the front end
engage.

Summary of Contents for C 240



































































































































































































































































































































































































































































































Search results

Summary of Contents for C 240

Reviews:

Related manuals for C 240

Brands by name

Popular brands

Mercedes-Benz C 240, Operator'S Manual

Search results

Summary of Contents for C 240

Reviews:

Related manuals for C 240

Brands by name

Popular brands