Mercedes-Benz C 240 Operator'S Manual Download Page 257

Page: 257 / 482

255

Controls in detail

Loading

왘

Pull release lever

왘

Fold backrest

forward.

Returning the backrest to original
position

왘

Fold backrest

rearward until it

engages.

왘

Fold seat cushion

rearward until it

locks into position.

If the backrest is not locked into position,
a red indicator

will be visible.

왘

Check for secure locking by pushing
and pulling on the backrest.

With the twin-reel roller blind installed:

앫

When folding the backrest forward,
fold the right section first and then
the left section.

앫

If only the left section is to be
folded, first remove the twin-reel
roller blind (

컄

page 253).

Summary of Contents for C 240



































































































































































































































































































































































































































































































Search results

Summary of Contents for C 240

Reviews:

Related manuals for C 240

Brands by name

Popular brands

Mercedes-Benz C 240, Operator'S Manual

Search results

Summary of Contents for C 240

Reviews:

Related manuals for C 240

Brands by name

Popular brands