95
The freezing cylinder
walls are scored.
a. Missing or worn
front bearing.
a. Install or replace the front bearing.
b. Missing or worn
front bearing
and/or beater
shoes.
b. Install or replace the front bearing and/or beater shoes.
c. Damaged
scraper blades
c. Replace the scraper blades.
d. Broken freezer
door baffle rod.
d. Replace freezer door.
e. Sanitizing solution was
still in the freezing
cylinder when the
machine was placed in
Auto.
e. Follow correct sanitizing and priming procedures. The
machine must
not
be placed in Auto during sanitizing.
Place the machine in Auto
only
after it has been primed
and all sanitizing solution has been removed.
f. Broken beater pins.
f. Replace the beater assembly.
g. Beater assembly is
bent.
g. Replace the beater assembly.
h. Gearbox is out of
alignment.
h. Call a service technician.
The product makes a
popping sound when
drawn.
a. Draw rate is set
too fast.
a. Adjust draw rate of 5 oz. to 7-1/2 oz. (142 g to 213 g) of
product by weight in 10 seconds.
b. Pump assembled
incorrectly.
b. Assemble and lubricate according to instructions in this
manual.
c. Freezing cylinder not
primed correctly.
c. Drain the freezing cylinder and reprime the machine.
No control panel
functions with power
switch in ON position.
a. Machine is unplugged.
a. Plug into wall receptacle.
b. Circuit breaker OFF or
blown fuse.
b. Turn the breaker on or replace the fuse.
Problem
Shake Side
Probable Cause
Soft Serve Side
Probable Cause.
Either Side Probable
Cause
Corrective Action
Summary of Contents for C602
