McDonald's C602, Manual

Page: 54 / 114

52
Syrup Topping Pump Assembly
After pump disassembly and cleaning is complete,
assemble the pump.
1. Lubricate and install the seal O-ring into the seal.
(See Figure-87.)
Figure-87
2. Install the seal assembly onto the piston end of the
plunger assembly.
3. Install the washer and spring onto the plunger
assembly. (See Figure-88.)
Figure-88
4. Install the plunger insert into the plunger tube by
positioning the end of the insert with the small hole
and beveled edge to enter the plunger tube first.

(See Figure-89.)
Figure-89
5. Install the plunger nut onto the plunger tube.

(See Figure-90.)
Figure-90
6. Install the flared end of the plunger tube (assembled
with insert and nut) onto the plunger assembly.

(See Figure-91)
Figure-91
7. Holding the nut, press the end of the plunger to
compress the spring until the threaded end of the
stem projects through the opening on the plunger
tube. Install the knob onto the threaded end of the