McDonald's C602, Manual

Page: 80 / 114

78
Optional Flavor -—decreases the value above the
cursor and is used to scroll downward in text displays.
Calibrate —advances the cursor position to the right
and is used to select menu options.
Note: You will not be able to dispense shakes while
accessing the Manager's Menu options except when the
CURRENT CONDITIONS screen is displayed.
The soft serve side will continue operation in the mode it
was in when the Manager’s Menu was selected.
However, the soft serve side control keys will not be lit
and are non-functional when the Manager's Menu or
Calibration Menu is displayed.
The control keys for both sides are functional in the
Manager's Menu when the CURRENT CONDITIONS
screen is displayed. (See Current Conditions on
page 79.)
Entering Access Code
With the ACCESS CODE screen on the display use the
Auto or optional Flavor symbols to set the first
code number in the cursor position. When the correct
number is selected, press the Calibrate symbol to
move the cursor to the next number position.

(See Figure-191.)
The access code for the Manager’s Menu is 8309.
Figure-191
Continue to enter the proper access code numbers until
all four numbers are displayed. Then press the Calibrate
symbol . The Manager's Menu list will display on the
screen, provided the correct access code is entered.
If an incorrect number is entered for the access code, the
display will exit the Manager’s Menu program when the
Calibrate symbol is selected. (See Figure-192.)
Figure-192
Menu Options
Press the Auto symbol or optional Flavor symbol
to move up or down through the Menu. Select a menu
option by aligning the option with the arrow on the left
side of the screen, then press the Calibrate symbol .
Exit the Menu program by selecting EXIT FROM MENU
or press the Cone symbol .
The following options are listed in the Manager's Menu:
• EXIT
FROM MENU
• SYRUP CALIBRATION
• VERIFY CALIBRATION
• SERVINGS COUNTER
• SET CLOCK
• AUTO HEAT TIME
• AUTO START TIME
• STANDBY MODE
• BRUSH CLEAN CYCLE
• MIX LEVEL AUDIBLE
• FAULT DESCRIPTION
• FAULT HISTORY
• LOCKOUT HISTORY
• HEAT CYCLE SUMMARY
• HEAT CYCLE DATA
• SYSTEM INFORMATION
• CURRENT CONDITIONS
• ENABLE WIFI
The EXIT FROM MENU option will exit the Manager's
Menu and return the control panel symbols to normal
operation.