MacDon M155E4, Unloading And Assembly Instructions

Page: 10 / 264

Section Summary of Change Internal Use Only
the ignition before leaving the operator
’
s
seat for any reason.
3.19.11 Replacing the Diesel Exhaust Fluid, page
84 Changed the title from
“
Draining and Refilling
the Diesel Exhaust Fluid Tank
”
to
“
Replacing the
Diesel Exhaust Fluid.
”
Removed the following WARNING ONLY
because the engine is already off at this point in
the manual:
•
To avoid bodily injury or death from
unexpected startup of the machine, always
stop the engine and remove the key from
the ignition before leaving the operator
’
s
seat for any reason.
Tech Pubs
3.19.13 Priming Hydraulic System, page 89
•
Figure 3.129, page 92
•
Step 14, page 92
•
Step 15, page 92
•
Figure 3.130, page 92
•
Step 17, page 92
Revised steps and added new pictures to
include the model year 2020 fuse panel.
ECN 58157
3.19.13 Priming Hydraulic System, page 89
•
Refer to the IMPORTANT below Step 16,
page 92
Changed the step to an IMPORTANT. Product Support
3.19.14 Checking and Adding Wheel Drive
Lubricant, page 93
•
Step 5, page 93
Revised step for clarity and corrected the cross
reference. Tech Pubs
3.19.15 Checking Traction Drive, page 93 Added NOTE:
•
One person can perform this task.
Tech Pubs
3.20.1 Removing Windrower from Factory Stand,
page 95
•
Step 2, page 95
Revised step and picture to show all lift lock
mechanisms. Tech Pubs
3.20.1 Removing Windrower from Factory Stand,
page 95
•
Step 3, page 95
Added CAUTION:
•
Check to be sure all bystanders have cleared
the area.
Tech Pubs
4.2.1 Setting the Cab Display Language, page 99
•
Step 5, page 100
Revised NOTE. Tech Pubs
4.3.2 Setting the Knife Overload Speed, page
105 Added topic introduction. Tech Pubs
4.3.3 Setting the Rotary Disc Overload Speed,
page 107 Added topic introduction. Tech Pubs
4.3.4 Setting the Hydraulic Overload Pressure,
page 108 Added topic introduction. Tech Pubs
215104
viii
Revision A