215104
39
Revision A
1005593
A
Figure 3.16: Wheel Position
6.
Position the wheels against the hubs so air valves (A) are on
the outside and the tire tread points forward.
NOTE:
For turf tires (diamond tread), be sure the arrow on the
sidewall points in forward rotation with windrower in cab-
forward orientation.
7.
Lift the wheel onto the hub using a lifting device.
8.
Lower the lifting device.
1011218
A
1
3
4
5
6
7
8
9
10
2
Figure 3.17: Drive Wheel Nuts
9.
Line up the holes in the rim with the studs on the wheel
drive hub and install wheel nuts (A).
IMPORTANT:
To avoid damaging the wheel rims and studs, tighten the
nuts by hand. Do
NOT
use an impact gun, do
NOT
use
lubricant or Never-Seez
®
compound, and do
NOT
overtighten the wheel nuts.
10. Torque drive wheel nuts to 510 Nm (375 lbf·ft) using the
tightening sequence shown.
IMPORTANT:
Use only manufacturer-specified nuts (MD #205397).
11. Repeat the torque procedure every hour until two consecutive checks confirm there is no movement of the nuts.
