215104
76
Revision A
1005718
A
B
Figure 3.98: Radio and Support
11. Attach the stud (supplied with radio) to the center rear of
the radio.
12. Attach support (B) to the stud on the back of the radio with
nut (A) and lock washer supplied with the support.
NOTE:
The support can be attached to the radio in multiple
locations to allow for proper radio mounting.
13. Install the radio panel using the original screws.
1005719
A
B
C
Figure 3.99: Radio and Support
14. Adjust bracket (A) (if necessary) by loosening nuts (B) to
allow the radio to slide into the opening and securely
capture support (C).
1005776
A
Figure 3.100: Antenna Mount on Cab Roof
15. Retrieve the antenna from inside the cab and remove the
protective cover from the base.
16. Remove protective cover (A) from the antenna mount on
the cab roof and thread the antenna onto the base until
hand tight.
NOTE:
Store the protective cover in the cab and reinstall to
protect the antenna mount if the antenna needs to be
removed.
