215104
202
Revision A
6.3.2
Attaching an A Series Auger Header
–
Hydraulic Center-Link without Self-
Alignment
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Shut down the engine, and remove the key from the ignition.
1000778
A
B
C
Figure 6.49: Header Boot
2.
Remove hairpin (A) from clevis pin (B) and remove clevis
pin from header boots (C) on both sides of the header.
1029714
A
B
Figure 6.50: Header Float Linkage
IMPORTANT:
To prevent damage to the lift system when lowering header
lift linkages without a header or weight box attached to the
windrower, ensure the float engagement pin is installed in
storage position (B) and
NOT
in engaged position (A).
1008925
A
Figure 6.51: Ground Speed Lever
CAUTION
Check to be sure all bystanders have cleared the area.
IMPORTANT:
Before starting engine for the first time the windrower is
operated in a season, remove the protective cover from the
exhaust stack.
3.
Start the engine and activate HEADER DOWN button (A) on
the ground speed lever (GSL) to fully retract header lift
cylinders.
