215104
47
Revision A
1029923
A
B
C
Figure 3.33: Traction Drive Pump
—
Bottom Left Side
NOTE:
The front two traction drive pump ports are for the wheel
motor on the
LEFT
side of the windrower.
18. Attach hose (A) (no tie) to pump port D (no tie). Tighten
fittings.
19. Attach hose (B) (yellow tie) to pump port C (C) (yellow tie).
Tighten fittings.
1029922
B
A
C
Figure 3.34: Traction Drive Pump
—
Bottom Left Side
NOTE:
The rear two traction drive pump ports are for the wheel
motor on the
RIGHT
side of the windrower.
20. Attach hose (A) (red tie) to pump port B (B) (red tie).
Tighten fittings.
21. Attach hose (C) (no tie) to pump port A (no tie). Tighten
fittings.
1005643
A
B
B
C
Figure 3.35: Hose Routing
22. Retrieve the two motor case drain hoses (MD #111312) at
the front frame and the 22 mm (7/8 in.) tee fitting on the
hose (C) from the pump.
NOTE:
The hoses are labeled with the part numbers.
23. Remove caps from the hoses (B) only.
24. Remove one cap from tee fitting (A), and quickly attach
hose (B) to minimize oil spillage.
25. Remove second cap from tee fitting (A), and quickly
connect other hose (B).
26. Tighten fittings.
27. Position hoses into frame.
