Section
Summary of Change
Internal Use Only
•
To avoid bodily injury or death from
unexpected startup of the machine, always
stop the engine and remove the key from
the ignition before leaving the operator
’
s
seat for any reason.
Added the procedure and pictures for opening
and closing the hood.
3.12.1 Adjusting Pre-cleaner, page 63
Added the procedure, CAUTIONS, and pictures
for opening and closing the right platform.
Tech Pubs
3.17.1 Lubrication Procedure, page 71
•
Step
Added step:
•
Shut down the engine, and remove the key
from the ignition.
Tech Pubs
3.19.1 Recording Serial Numbers, page 78
•
Step
•
Figure
•
Combined two steps into one.
•
Changed picture to grayscale.
Tech Pubs
3.19.2 Checking Tire Pressures, page 78
•
Table
Revised tire pressure information:
•
Corrected pressures for bar and turf tires.
•
Tire list now includes two types of bar and
turf tires.
Tech Pubs
3.19.3 Adding Tire Ballast, page 79
•
Table
Added the word
“
maximum
”
to the table title.
Tech Pubs
3.19.4 Checking Engine Air Intake, page 80
Removed the following WARNING
ONLY
because the engine is already off at this point in
the manual:
•
To avoid bodily injury or death from
unexpected startup of the machine, always
stop the engine and remove the key from
the ignition before leaving the operator
’
s
seat for any reason.
Tech Pubs
3.19.5 Checking Hydraulic Oil Level, page 81
Removed the following WARNING
ONLY
because the engine is already off at this point in
the manual:
•
To avoid bodily injury or death from
unexpected startup of the machine, always
stop the engine and remove the key from
the ignition before leaving the operator
’
s
seat for any reason.
Tech Pubs
3.19.8 Checking Gearbox Lubricant Level, page
83
Removed the following WARNING
ONLY
because the engine is already off at this point in
the manual:
•
To avoid bodily injury or death from
unexpected startup of the machine, always
stop the engine and remove the key from
Tech Pubs
215104
vii
Revision A