215104
183
Revision A
Chapter 6:
Attaching Headers
6.1
Attaching Header Boots
Header boots are required to attach a D Series or D1 Series Draper Header to the windrower. Attach header boots
(supplied with header) to windrower lift linkage if not already installed.
1029714
A
B
Figure 6.1: Header Float Linkage
IMPORTANT:
To prevent damage to the lift system when lowering header lift
linkages without a header or weight box attached to the
windrower, ensure the float engagement pin is installed in
storage position (B) and
NOT
in engaged position (A).
1000752
A
B
Figure 6.2: Header Boot
1.
Remove pin (B) from boot (A).
1000753
A
B
C
D
Figure 6.3: Header Boot
2.
Position boot (B) onto lift linkage (A) and reinstall pin (C).
Pin may be installed from either side of boot.
3.
Secure pin (C) with hairpin (D).
4.
Repeat for opposite side.
