215104
160
Revision A
1011783
CXXX
EXXX
ACTIVATE DWA DRV
D 0 P 0
- +
D
D
B
A
C
E
Figure 4.146: DWA Drive
7.
Press SELECT (E) until ACTIVATE DWA DRV is displayed on
the upper line.
CAUTION
Check to be sure all bystanders have cleared the area.
IMPORTANT:
Do
NOT
overspeed the DWA drive.
8.
Press and hold HAZARD (C) button.
•
Press left arrow (B) to decrease DWA drive speed.
•
Press right arrow (D) to increase DWA drive speed.
IMPORTANT:
Verify the DWA drive is functioning properly.
9.
Release HAZARD (C) button. The DWA drive will stop.
10. Press PROGRAM (A) to exit programming mode or press
SELECT (E) to proceed to next ACTIVATE FUNCTION.
4.9.9
Testing the Reel Fore-Aft Activate Function Using the Cab Display Module
NOTE:
•
The header
MUST
be attached to windrower to perform this procedure.
•
The engine
MUST
be running to perform this procedure.
1011772
C###
E###
WINDROWER SETUP?
NO/YES
A
B
Figure 4.147: CDM Programming Buttons
1.
Start the engine.
2.
Press PROGRAM (A) and SELECT (B) on the cab display
module (CDM) to enter programming mode.
•
WINDROWER SETUP? is displayed on the upper line.